For researchers

Reading results

Understand result metrics, interpretation limits, candidate comparisons, and what to share with experimental collaborators.

Computational results include predicted structures, values, and confidence estimates. Understanding what each value measures and its limits helps you compare candidates for experiments.

Computational results and experimental evidence

Keep these five types of evidence separate when interpreting results.

TypeMeaningExample
Computational predictionStructures or values produced by a modelPredicted complex coordinates
Structural confidenceHow confident the model is in its predictionpLDDT, PAE, ipTM
Actual bindingWhether two molecules actually bindBinding observed experimentally
Experimental validationWhether it was measured under defined conditionsKd measured by SPR
Clinical effectWhether it has an effect in peopleClinical trial results

The first two are computational outputs; computation alone cannot establish the other three. High confidence means the model is confident, not that the structure has been proven real.

Information on the results page

Metric summary shows values from the run. Output files contain original coordinates, sequences, and tables for download and reuse. Execution evidence records computational conditions such as model weights and input-file hashes. Refer to it when citing or repeating a calculation.

Reading individual metrics

Definitions and ranges may differ by tool. Check the definition in that tool's reference first.

MetricMeaningTypical rangePreferred directionDo not interpret it as
pLDDTModel confidence in local structure0~100HigherpLDDT 90 as "90% accuracy" or "90% binding probability"
PAEExpected positional error in one region after alignment on anotherÅLowerAn experimentally measured error
ipTMConfidence in the arrangement and interfaces of complex components0~1HigherAffinity or probability of successful binding
TM-scoreGlobal fold similarity between two structures0~1HigherSequence similarity
lDDTLocal similarity to a reference structure0~1 or 0~100HigherThe same measure as prediction confidence (pLDDT)
RMSDRoot mean square deviation of matched atomic coordinatesÅSmallerA comparison without specifying atom selection and alignment
DockQContact and arrangement quality relative to a reference complex0~1HigherA value obtainable without a reference structure
ΔΔGChange in a free-energy difference between states or variantskcal/mol, etc.Depends on the toolA value whose sign can be interpreted without checking its convention
TmTemperature at the midpoint of a thermal transition°CHigher under the same conditionsA guarantee of binding, function, and storage stability

The interpretation of ΔΔG depends on which energy difference it measures. Binding ΔΔG and folding-stability ΔΔG address different questions. Sign conventions and subtraction order vary by tool: negative values can be favorable in one case and positive values in another. Interpret the direction using that tool’s definition and comparison baseline.

Four common misconceptions

"High confidence means binding." ipTM describes confidence in a predicted arrangement. It is neither binding affinity nor the probability of observing binding in an experiment. These quantities measure different things.

"A good docking score means a low Kd." Docking scores support computational search and ranking. The dissociation constant Kd is measured at equilibrium. A good score may help prioritize a candidate for experiments, but must not be converted directly into an affinity value.

"More contacts mean stronger binding." Counts of hydrogen bonds or salt bridges cannot be converted directly into affinity.

"The same metric can be compared across tools." Names may match while definitions and scales differ. Check that definitions match before ranking values from different tools in one table.

Comparing candidates

Compare candidates under the same computational conditions. Different inputs, settings, or model versions make it hard to distinguish candidate effects from condition effects. Compare hashes in the execution evidence to check conditions.

Read global and region-specific values together. A high overall structural confidence can coexist with low confidence in the region of interest.

Failed runs also carry information. Rejected inputs, runtime failures, and low-confidence predictions are different signals. Execution history provides each attempt's status and failure reason.

Citing or repeating results

To cite values in a paper or repeat the calculation months later, retain the inputs and settings used. Execution evidence bundles hashes of model weights and input contents, settings, and the license basis for running that tool.

Identical inputs and settings may still produce different numerical results. Random seeds and execution environments can cause variation. Execution records show what was calculated and under which conditions.

Handing off to an experiment

Send conditions and limitations with the numbers: tool and version, input structure and selected region, metric definitions, and the fact that the values are predictions. Computation helps narrow experimental candidates; it does not replace experiments.

Importing experimental results

Upload the laboratory's CSV under Experimental measurements on the results page and link it to candidates. Measurements are stored separately from predictions and shown in measured-value columns after prediction columns. Replicates remain individual records rather than being averaged.

There are two ways to upload CSV files.

MethodWhen to use itWhat to do on upload
The laboratory's original tableAn Excel report saved as CSVSelect the candidate-ID column and specify the metric, unit, and conditions for each measurement column.
Nadoo Bio standard CSVResults requested in the standard formatSelect the file; metrics, units, and conditions are already included.

Before requesting results, download a blank template with Get standard template on the upload screen and send it to the laboratory. The returned file can then be uploaded without reformatting.

Standard CSV rules

Write one measurement per row. Two measurements of the same candidate use two rows; KD and Tm measurements also use separate rows.

ColumnRequiredWhat to enter
candidate_idRequiredCandidate ID from the Nadoo Bio request sheet. This links the measurement to the candidate in the result file.
assayRequiredAssay type: binding_screening (binding screening), binding_kinetics (binding kinetics), thermostability (thermal stability), expression, enzyme_activity (enzyme activity).
methodRequiredMeasurement method, e.g. SPR, BLI, nanoDSF.
metricRequiredMetric: KD, kon, koff, Tm, Tonset, Tagg, yield, concentration, binding_call, binding_strength, expression_call.
providerRequiredMeasurement provider
value, unitNumeric metricsNumbers only in value; put the unit in unit.
value_textCategorical metricsThe binding_call, binding_strength, or expression_call classification, e.g. true or strong.
qualifierOptionalLeave blank for an exact value. < and > mean less than and greater than. ND means not detected; leave the value empty.
replicateRecommendedReplicate number 1, 2, 3…; use mean for a provider-calculated average.
targetRequired for binding measurementsBinding partner molecule
temperature_c, buffer, condition_noteRecommendedTemperature (°C), buffer, and other conditions.
uncertainty, uncertainty_typeOptionalUncertainty and its type (sd, sem, ci95_low, ci95_high, log10_sd). Provide the type whenever a value is given.
provider_sample_id, measured_at, source_file, notesOptionalProvider sample ID, measurement date (format: 2026-10-20), original filename, and notes.

Each metric has a defined set of units. Unsupported units are flagged before upload.

MetricUnit
KD, concentrationM, mM, uM, µM, nM, pM (comparisons use a separately converted value in M).
kon1/(M*s)
koff1/s
Tm, Tonset, TaggdegC or °C
yieldmg/mL, mg/L, ug/mL

Detection limits and nondetection retain their meaning. <5 is not converted to 5, and ND is not converted to 0. Values containing units in the same cell ("12 nM") and duplicate replicate numbers under identical conditions are rejected. Do not put predictions such as ipTM, pLDDT, or docking scores in this file.

The following fictional values demonstrate the format; they are not experimental results.

candidate_id,assay,method,metric,qualifier,value,value_text,unit,replicate,target,temperature_c,provider
cand-01,binding_kinetics,BLI,KD,,12.5,,nM,1,Target A,25,Example laboratory
cand-01,binding_kinetics,BLI,KD,,13.1,,nM,2,Target A,25,Example laboratory
cand-01,binding_kinetics,BLI,binding_call,,,true,,1,Target A,25,Example laboratory
cand-02,binding_kinetics,BLI,KD,ND,,,nM,1,Target A,25,Example laboratory
cand-02,thermostability,nanoDSF,Tm,,61.4,,degC,1,,,Example laboratory

Sample request to the laboratory

Please return measurements in the attached CSV template, with one measurement per row. Copy candidate IDs from the request sheet into candidate_id. Enter numbers only in the value field and units in unit. For nondetection, set qualifier to ND and leave the value blank. Please report each replicate in its own row rather than only an average; if also reporting a mean, set replicate to mean. Please include the original instrument reports (PDF or Excel).

Linking to a specific structure region

Create a link to specific chains and residues in a PDB/mmCIF file. Opening it selects that region in the 3D viewer.

https://nadoo.bio/app/projects/<project-id>/structures/<artifact-id>?sel=A:45-55,A:60,B:10A
  • Numbers are author residue numbers from the structure file. Negative values (A:-2) and insertion codes (B:10A) are supported. They may differ from positions in the sequence string.
  • Positions without coordinates are not selected; they are listed separately as "Positions absent from this structure." If a range endpoint lacks coordinates, only existing residues within the range are selected.
  • For a file with multiple models, choose a model on screen or add model= to the link.
  • Recipients need permission to view the file in its project. If not signed in, they return to the same link after signing in.
  • AI tools create the same link by passing kind: "structure" and selection to create_view_link.

On this page